Z-Wave ZXT-120 Betriebsanweisung Seite 43
- Seite / 64
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Power: 4x 1.5V battery LR14/C (included)
Power adapter: 6V, 600mA (not included)
Auto stop: yes, after 3 minutes
Low battery warning: yes
Battery life time: 1 year
WARNING BY SOUND AND LIGHT
The SE812 Siren gives a loud sound and a flashing
warning light, so everybody in the building will know
immediately that an alarm has occurred. You can choose
to activate the siren either by burglary alarm or by a
smoke alarm or activate the siren by both alarms. It is
even possible to install multiple sirens, so the alarm can
be heard loudly at multiple locations. The SE812 Siren
has an adjustable jumper inside, so you can choose
between either a 90dB or a 100 dB volume of the siren.
POWERED BY POWER SUPPLY OR BATTERIES
Choose either the included batteries or a power supply
to power your siren. When using batteries, the siren will
give a warning when the batteries are almost empty.
BENEFITS
battery operated for easy placement
long battery life with low battery notification
temper alarm notification
notifies household and disturbs burglar
use same siren for all kind of alarms
two way communication - can report statusInclude or
exclude SE812
01
Link key
01
Pressing link key three times within 1.5 second will
enter inclusion mode. The detector will stay “awake” for
10 minutes to allow time for setting and device status
enquiring. In this mode device can be added or removed
from Zipabox.
10.10 SINGLE RELAY SWITCH FGS211
Remotely Controlled Relay Switch is designed to operate
in a wall switch box, wall socket box or in locations where
the control of an electric device (up to 1.5 kW) is needed.
Microprocessor control
Executive elements: relays.
The device may be operated by mono-stable and bi-
stable push-buttons.
INCLUDE OR EXCLUDE RELAY SWITCH FGS211
Add Switch to the network by pushing three times push
button key no. or service button B located inside the
housing of the device. For bi-stable switch perform
3 position changes.
10.11 DOUBLE RELAY SWITCH FGS221
Remotely Controlled Double Relay Switch is designed
to operate in a wall switch box or in locations where the
control of an electric device (up to 1.5kW) is needed.
Microprocessor control
Executive elements: relays
The device may be operated by mono-stable and bi-
stable push-buttons
43
SMART ALARM USER GUIDE v1.1
- SMART ALARM 1
- LEGAL INFORMATION 2
- SAFETY INFORMATION 3
- TABLE OF CONTENTS 4
- 1.0 INTRODUCTION 6
- 1.1 PREPARATION AND 8
- LOCATION PLANNING 8
- 2.0 UNPACKING ZIPATO 9
- 2.2 PIR MOTION DETECTOR W 10
- TEMPERATURE METER 10
- 2.3 DOOR/WINDOW SENSOR 10
- 3.0 INSTALLATION & 14
- MOUNTING 14
- PIR MOTION DETECTOR MOUNTING 15
- DOOR/WINDOW SENSOR MOUNTING 15
- RFID KEYPAD MOUNTING 16
- 4.0 CONNECT 17
- THE ZIPABOX 17
- 5.0 CREATE 18
- USER ACCOUNT 18
- 5.2 REGISTER YOUR ZIPABOX 19
- 5.3 FINALIZE YOUR ACCOUNT 19
- YOUR CONTACTS 20
- 6.0 CONNECTING 21
- RESET DOOR/WINDOW SENSOR 22
- JOIN DOOR/WINDOW SENSOR 22
- REMOVE DOOR/WINDOW SENSOR 22
- RESET RFID KEYPAD 23
- JOIN RFID KEYPAD 23
- REMOVE RFID KEYPAD 23
- 7.0 SECURITY WIDGET 24
- REPORTS TAB 25
- USERS TAB 25
- CONTROLS 26
- CREATE ZONES 26
- 7.3 TESTING THE SYSTEM 27
- 8.0 USING THE SYSTEM 28
- STOPPING THE ALARM 29
- DISARMING THE SYSTEM 29
- ALARM MEMORY 29
- LOW BATTERY DISPLAY 29
- 9.0 ALERTING GUIDE 30
- EMERGENCY 24 HOURS 31
- INTRUDER 31
- TECHNICAL 31
- OPTIONAL 31
- SMART ALARM USER GUIDE v1.1 32
- PIR AND DOOR/WINDOW CONTACT 34
- KEYPAD REMOTE CONTROL 34
- SMOKE DETECTOR 34
- FLOOD DETECTOR 34
- 10.0 ACCESSORIES 35
- 10.3 RADIATOR VALVE 36
- RESET RADIATOR VALVE 37
- JOIN RADIATOR VALVE 37
- REMOVE RADIATOR VALVE 37
- REINSTALLATION MODE 37
- CREATING NEW CLIMATE 37
- 10.4 THERMOSTAT 38
- 10.5 IR REPEATER ZXT120 39
- 10.8 FLOOD SENSOR ST812 42
- 10.9 SIREN SE812 42
- WARNING BY SOUND AND LIGHT 43
- BENEFITS 43
- 10.12 UNIVERSAL DIMMER FGD211 44
- 10.13 ROLLER SHUTTER FGR221 44
- 11.0 WIDGETS 45
- FUNCTION 46
- MANUAL CONTROL 46
- AUTOMATIC CONTROL 47
- AWAY MENU 48
- DEVICES MENU 48
- 11.2 LIGHTS & POWER 49
- 11.3 SENSORS 51
- 11.4 METERS 52
- SETTINGS 53
- 11.5 ENERGY 54
- GRID VIEW 55
- 11.6 CAMERAS 56
- SETTING UP THE CAMERA 57
- 12.0 TROUBLESHOOTING 58
- WARRANTY 59
- CALL SUPPORT 59
- CAUTION 59
- 13.0 SPECIFICATIONS 60
- DOOR/WINDOW SENSOR 61
- RFID KEYPAD 61
- 14.0 GLOSSARY 62
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 1.580 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern