Z-Wave ZXT-120 Betriebsanweisung PDF herunterladen (Seite 10)

2.2 PIR MOTION DETECTOR W.

TEMPERATURE METER

This motion detector (PIR = passive infrared receiver)

detects the presence of a person in a room. The units

send information to a controller or any other associated

Z-Wave device, the sensor is a battery-powered device,

which is in sleeping state unless an action is detected.

After a programmable sleeping time the device wakes

up and sends status information. After this the unit goes

back to sleeping modus. Batteries can be changed without

unscrewing the device from the door or frame. The unit

will give a visual warning on the device and sends a

warning to the Z-Wave controller, when batteries need to

be replaced. The unit offers a tampering control and sends

an alarm message when tampered. Package consists of

ZP 3012 sensor, adhesive tape for sensor, CR123A Lithium

Battery and Installation & Operation Manual.

FEATURES

Z-wave compatible

battery operated

two way communication

temper alarm

temperature meter

passive detection with no emission

PIR MOTION DETECTOR PREPARATION

PIR motion detector is ready for usage when its batteries

are inserted. To do that see image below.

PIR MOTION DETECTOR CAN BE SEEN IN

SENSORS WIDGET AND METERS WIDGET

PIR under Meters widget

PIR under Sensors widget

2.3 DOOR/WINDOW SENSOR

Door/window sensor is easy to install device for detecting

when door, window, container, cabinet etc. is opened or

closed. The Door/Window Sensor is a battery-powered

Z-Wave magnetic door/window sensor with an extremely

small form factor. The D/W sensor will send radio signals

up to 6 associated Z-Wave devices within its own Z-Wave

network when the main unit separates from the smaller

unit. Bidirectional mounting plate and push button allows

for easy end-user installation. The Door/Window Sensor

also has tamper prevention capabilities and low-battery

alerts. Package consists of door/window sensor main

unit, magnet, bracket for contact magnet, adhesive tape

for magnet / sensor, CR123A lithium battery, screws for

bracket/ sensor and Installation & operation manual,

FEATURES

Z-wave compatible

battery operated

tamper alarm

two way communication

SMART ALARM USER GUIDE v1.1

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare

Z-Wave ZXT-120 Betriebsanweisung Seite 10

Kommentare zu diesen Handbüchern